Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Replace window motor button

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Push button
Operation: Replace window motor button

If we are faced with the breaking or replacement of the electric button on the door of our car, the first thing to do is to buy a new one, at a moderate price and of good quality. The replacement procedure is simple, it will be enough to follow the advice of the guide in order not to run into any errors that could compromise its performance. As needed you need screwdrivers: torx and slotted. To remove the faulty motor it will be necessary to remove the door cover panel and proceed with unscrewing the screws of the handle compartment, disconnect the connectors and all the screws that hold the panel anchored. Once the screws of the motor have been loosened with extreme caution, it can be removed from its housing.


Posted on 3 September 2023 by ScegliAuto



Removing the window lifter motor
Mercedes Classe E (2002-2009 / W211) In order to disassemble the window motor, the door panel must first be removed: then remove the plastic coating applied to the lock, the cap on the f
How to replace the power window motor of the Mercedes E-Class.
Mercedes Classe E (1984-1995 / W124) The replacement of the window regulator motor of the Mercedes E-Class, model W124, is a very simple procedure that can be carried out independently,
How to replace the Mercedes W124 window drive motor
Mercedes Classe E (1984-1995 / W124) As a first operation it will be necessary to remove the panel of the affected door, and lower the window to about one centimeter from the gasket, the

Other guides that may interest you

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos