Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Battery Located in the Mercedes Viano Van?

Model: Mercedes Viano MK 1, W639 - Years 2003-2013
Part: Battery

In this video, see where the battery is located in the Mercedes Viano van, useful if you need to replace or simply recharge it. As shown, it is not in the usual engine bay housing but is instead located inside the cabin, specifically under the driver's seat. To access it, you will need to remove the panel in front of the footrest by unlocking the relevant clips. To remove the battery, simply undo both lower bolts and disconnect the two terminals, always starting with the negative.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the battery located in the Mercedes Viano van?
Where is the battery located in the Mercedes Viano van?
Mercedes Viano (2003-2013 / MK 1, W639) In this video, you can see where the battery is located in the Mercedes Viano van and how to proceed if you need to replace it. As shown, the battery…
Where is the fuse box of the Mercedes Viano W639?
Where is the fuse box of the Mercedes Viano W639?
Mercedes Viano (2003-2013 / MK 1, W639) The fuse box of your Mercedes Viano W639 (2003-2013) is located inside the cabin. With this dedicated guide, you will finally be able to locate it wi…
Where to Find the OBD2 Port on a Mercedes Viano
Where to Find the OBD2 Port on a Mercedes Viano
Mercedes Viano (2003-2013 / MK 1, W639) To gain access to the OBD2 port located inside your Mercedes Viano, carefully read all the following steps and apply them one by one. First, park you…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos