Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the ESP Fuse on the Mercedes E-Class

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuse box

See other generations:
Video tutorial

This guide provides instructions on how to remove and replace the fuse for the ESP system on the Mercedes E-Class by following these simple steps. First, open the hood of your car and remove the plastic cover of the fuse box. Then, take the fuse diagram found in the owner's manual and remove the ESP fuse from the fuse box, as shown in the video.

At this point, install the new fuse of the correct type and with the same amperage, then check the operation of the ESP.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to Disable the ESP on the Mercedes S-Class
How to Disable the ESP on the Mercedes S-Class
Mercedes Classe E (2016-2023 / W213) .. to disable the ESP system on the Mercedes S-Class. However, it is advised never to disable the ESP to avoid compromising the vehicle's safety and.. …
How to Reset the ESP Light on the Mercedes E-Class W211
How to Reset the ESP Light on the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. steps to reset the ESP light on the Mercedes E-Class W211, following the instructions below. First, get inside the vehicle and turn on the ignition;.. …
How to Disable Traction Control on the Mercedes E-Class?
How to Disable Traction Control on the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To disable traction control on the Mercedes E-Class, turn on the instrument cluster to navigate through the options on the display using the arrows.. …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos