Do it yourself
Frequently asked questions about cars and motorcycles

Removing the front bumper.

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Front bumper

You start by unscrewing, using a special key, the two bolts that secure the plastic protection that is underneath at the front wheel. Then remove the clips and bolts that secure the same piece in the wheel well. Now, still in the wheel compartment, unscrew the screw that blocks the bumper at the end. The same work is done at the other wheel. Now, after opening the hood of the engine compartment, we unscrew the two bolts holding the bumper at the top and the two bolts on the sides of the grille for the radiator air intake. Finally, we can extract the bumper by pulling it forward and disconnecting the lights that are mounted on it. The maintenance operation that is performed in the images is carried out on a Mercedes C-Class.


Posted on 13 September 2023 by ScegliAuto



Removing the front bumper of a Mercedes C.
Mercedes Classe C (2007-2013 / W204) We don't know how to remove the front bumper? Let's see how the front bumper of a Mercedes C-Class is removed. Lift the engine hood and put it in saf
Front headlight disassembly instructions
Mercedes Classe C (2000-2007 / W203) To disassemble the front headlight it is first of all necessary to remove the front bumper since the lower part of the headlight itself is positioned
Removing the front bumper Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) Today, in this video tutorial, we will see how to disassemble the front bumper of a Mercedes C-Class. First we open the car's engine hood and remove

Other guides that may interest you

How do you reset the tire pressure light on the Toyota Aygo X?

To reset the tire pressure warning light on the Toyota Aygo X, you need to inflate the tires until they reach the recommended pressure value: this will be indicated on the sticker attached to the driver's side door pillar. Once the tires are inflated, you can go inside the cabin and turn on the instrument panel: after it has been turned on, you can open the glove box on the passenger side and locate the SET button that must be held down to turn off the warning light.

Watch the video!


by ScegliAuto

More videos