Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on the Mercedes G-Class?

Model: Mercedes Classe G W4631st - Years: 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will learn how to replace the headlight bulbs on the Mercedes G-Class, a very simple and quick operation. First, ensure that the key is not in the ignition.

Then, locate the two screws located beneath the headlight and remove them using a standard Phillips screwdriver. Next, remove the outer trim, unscrew the indicated bolts using a 10mm socket wrench, and separate the headlight from the frame.

At this point, disconnect the power connector, replace the burnt-out bulb, and follow the reverse procedure.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

Where Are the Fuses in a Mercedes G-Class?
Mercedes Classe G (1989-2018 / W4631st) .. The fuses in a Mercedes G-Class are located inside the designated fuse boxes present in the vehicle. In this type of vehicle, you.. …
Where Are the Fuses on the Mercedes-Benz G-Class?
Where Are the Fuses on the Mercedes-Benz G-Class?
Mercedes Classe G (1989-2018 / W4631st) .. Each fuse in the Mercedes-Benz G-Class is located inside one of the designated fuse boxes present in the vehicle: in this type of car,.. …
Fuse Diagram and Placement for the Mercedes G-Class
Fuse Diagram and Placement for the Mercedes G-Class
Mercedes Classe G (1979-1992 / W460) .. you locate the internal fuses of the Mercedes G-Class in simple and quick steps. First, get inside the vehicle on the driver's side and start locating.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Compass?

To reset the tyre pressure warning light on the Jeep Compass, inflate all tyres to the correct pressure value, which is indicated on the sticker affixed to the driver’s door pillar. Once all tyres are at this pressure, switch on the ignition and press and hold the corresponding button located to the left of the steering wheel. This will turn off the warning light, but to prevent it from reactivating, you must reset the system using an OBD scanner connected to the designated port.

Watch the video!


by ScegliAuto

More videos