Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the central console panel on a Mercedes C-Class W206 version

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W206 - Years 2021-2024
Part: Bodywork
Operation: How to replace the central console panel on a Mercedes C-Class W206 version

In this video we can see how to replace the central console covering of a Mercedes C-Class W206 version: after removing the covering we intend to replace, using a plastic spatula (it is only inserted by pressure so we will remove it easily) we can insert the new one. We suggest for this the complete kit that we can find on fruugo. It at code 106757964-231297045, priced at 109.00 euros, with free delivery. This is specifically built for this car and it seems to be of good quality; there are others at much lower prices, but the quality did not seem excellent to us. The installation is very simple, it is all by pressure so just follow the shapes of the pieces and press gently.


Posted on 29 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - How do you open the bonnet, for maintenance, on the Mercedes C-Class W205? Read Answer
    • Classe C 2007-2013 - How much is the trunk and tank volume of the Mercedes c220 CDI w204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos