Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Vito
  6. : How to reset the service light on the Mercedes Vito

Mercedes Vito - Video tutorial

Model: Mercedes Vito W639, MK 2 - Years 2003-2013
Part: -board computer
Operation: How to reset the service light on the Mercedes Vito

The reset of the service light of the 2007 Mercedes Vito follows very easy and quick steps to be performed independently. There are 5 steps to be followed. The first step is to turn on the vehicle's instrument panel. The second step is to press the button on the tachometer of the instrument panel. The third step is to keep the button pressed until the light and kilometers start flashing. The fourth step is to release the button. The fifth step is to press the button again when the reset message appears to complete the reset of the light and turn off the instrument panel.


Posted on 13 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos