Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Left Rear Headlamp Bulb on a Mercedes B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Tail light bulb

See other generations:
Video tutorial

When the left rear headlamp bulb on a Mercedes B-Class does not light up, it needs replacing as soon as possible. To replace it, you must: - open the boot; - open the inner side cover of the trim; - disconnect the connector by pulling it outwards; - remove the worn bulb from the housing; - insert a new bulb; - reconnect the connector; - close the side cover; - close the boot; to replace the right rear headlamp bulb, follow the same steps outlined above.

Always test the bulb's operation before driving.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

Replacing the Brake Light Bulb of the Mercedes B-Class
Replacing the Brake Light Bulb of the Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. light bulb of the rear light on the Mercedes B-Class. First, open the boot lid and start removing the side cover, which gives access to the inside of.. …
How to Replace the Rear Light Bulb on a Mercedes-Benz B-Class?
How to Replace the Rear Light Bulb on a Mercedes-Benz B-Class?
Mercedes Classe B (2005-2011 / MK 1, W245) .. replace the rear light bulb on a Mercedes-Benz B-Class, start by opening the tailgate. Then, remove the access panel by unscrewing the screws. Once the.. …
How to Replace the Front Headlamp Bulb on a Mercedes B-Class W245
How to Replace the Front Headlamp Bulb on a Mercedes B-Class W245
Mercedes Classe B (2005-2011 / MK 1, W245) .. front headlamp (driver's side) on the Mercedes B-Class W245 is quite simple. Once the bonnet is opened and secured, first unclip and move the washer fluid.. …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos