Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the AdBlue Fluid Tank on the Mercedes E-Class

Model: Mercedes Classe E W213 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: AdBlue warning light

See other generations:
Video tutorial

This guide will show you the main steps to remove and replace the AdBlue fluid tank on the Mercedes E-Class. First, lift the vehicle and locate the AdBlue tank at the rear; then disconnect the fluid line and its electrical connector, removing the mounting screws on the sides as shown in the video.

At this point, replace and install the new AdBlue fluid tank, then refill it with the new fluid, following the video tutorial to the end!


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Removing the AdBlue Tank from the Mercedes E-Class
Removing the AdBlue Tank from the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. the damaged AdBlue tank from the Mercedes E-Class for replacement. First, lift the vehicle and start removing the mounting screws from the support.. …
How to Refill AdBlue on the Mercedes E-Class
How to Refill AdBlue on the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. let's see how to do this on the Mercedes E-Class. First, open the trunk and start removing the floor panel to access the cap of the AdBlue tank,.. …
How to Refill AdBlue in the Mercedes E-Class?
How to Refill AdBlue in the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To refill AdBlue in the Mercedes E-Class, open the trunk to lift the carpet at the base. Once the carpet is removed, you can access the.. …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos