Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the AdBlue Tank from the Mercedes E-Class

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

Today, discover the instructions to remove the damaged AdBlue tank from the Mercedes E-Class for replacement. First, lift the vehicle and start removing the mounting screws from the support brackets located under the tank; then, unscrew the side screws of the tank, disconnecting the AdBlue lines and the electrical connector, as shown in the video.

At this point, replace the AdBlue tank with the new one, connecting it and securing it to the frame; finally, refill the AdBlue.


Posted on 16 April 2026 by ScegliAuto


Related tutorials

Replacing the AdBlue Fluid Tank on the Mercedes E-Class
Replacing the AdBlue Fluid Tank on the Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. replace the AdBlue fluid tank on the Mercedes E-Class. First, lift the vehicle and locate the AdBlue tank at the rear; then disconnect the fluid line.. …
How to Top Up the AdBlue Fluid in the Mercedes E-Class
How to Top Up the AdBlue Fluid in the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. how to top up the AdBlue fluid in the Mercedes E-Class. First, open the hood of the vehicle and start removing the cargo area floor to access the bottom... …
How to Refill AdBlue in a Mercedes E-Class W212
How to Refill AdBlue in a Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. comes on in the dashboard of your Mercedes E-Class W212, it means the level of this fluid in the respective tank is too low and needs to be refilled... …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos