Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Front Turn Signal Bulb on a Mercedes C-Class

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Light bulb

See other generations:
Video tutorial

Today's steps will show you how to remove and replace the front turn signal bulb on a Mercedes C-Class. First, open the hood of the vehicle and start removing the front light assembly; to do this, simply unscrew the mounting screws and disconnect the electrical connector from the bulb holder, as shown in the video.

Now, remove and replace the turn signal bulb with a new one of the correct type and with the same base; then reassemble the light assembly, reconnect it, and finally check its operation!


Updated on 2 October 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) .. bulb in the front headlamp of your Mercedes C-Class. First, open the hood of your car and start removing the socket along with the turn signal bulb.. …
Mercedes Classe C (2007-2013 / W204) .. the side turn signal bulb on a Mercedes C-Class, following the instructions below. First, remove the glass of the exterior rearview mirror by prying.. …
Mercedes Classe C (2014-2021 / W205) .. the exterior rearview mirror of the Mercedes C-Class. First, remove the plastic cover of the mirror using a thin lever; then, take out the glass of.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos