Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Turn Signal Bulb on a Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Side marker bulb

In this guide, you will learn how to remove and replace the side turn signal bulb on a Mercedes C-Class, following the instructions below. First, remove the glass of the exterior rearview mirror by prying it off the sides with something thin, disconnecting the electrical connectors located at the back; then unscrew the screws of the mirror cap to remove it and access the side turn signal using a Torx screwdriver. At this point, disconnect the electrical connector of the bulb and replace the light with a new one, reassembling everything!

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Turn Signal Bulb on a Mercedes C-Class
Replacing the Front Turn Signal Bulb on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. bulb in the front headlamp of your Mercedes C-Class. First, open the hood of your car and start removing the socket along with the turn signal bulb.. …
Disassembly for Side Turn Signal Bulb Replacement
Disassembly for Side Turn Signal Bulb Replacement
Mercedes Classe C (1993-2000 / W202) Open the hood and ensure it is securely supported. The side turn signal is simply clipped in through a side tab located on the fender: press the tab …
How to replace the front turn signal bulb of the Mercedes C-Class
How to replace the front turn signal bulb of the Mercedes C-Class
Mercedes Classe C (1993-2000 / W202) .. bulb of the front headlight of the Mercedes C-Class. First, we open the hood of the car and begin to disassemble and remove the front headlight; to.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos