Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the interior rearview mirror on the Mercedes Benz C220

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Interior rearview mirror
Operation: How to replace the interior rearview mirror on the Mercedes Benz C220

The guide shows how to remove the interior rear view mirror of the Mercdes Benz C220 (W203). The operation does not require specific tools but only a little strength. Taking the mirror at the base, it is necessary to shake it with a lot of energy to get the two locking pins out of their seat; it will be enough to rotate to the right and left and at the same time push back and forth. Once the mirror has been removed, it is necessary to disconnect the electric cables after having removed the ceiling light. The refitting of the mirror takes place by putting the mirror in position and applying force until the tips of the block return in place. If you were to detach the mirror from the base, it will be enough to apply a lot of force to get the piece back into position.


Posted on 20 April 2024 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos