Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Turn Signal Bulb in the Mercedes C-Class Mirror

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Side marker bulb

See other generations:
Video tutorial

These simple steps will guide you through the process of removing and replacing the light in the external rearview mirror of the Mercedes C-Class. First, move to the outside of the vehicle and start by removing the mirror glass, then detach the plastic cover by prying it off from the sides.

Next, unscrew the screws of the turn signal light in the mirror, disconnecting the electrical connector to remove it, as shown in the video. At this point, install the new turn signal bulb, and finally reassemble all the components of the mirror!


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How to Remove the Turn Signal from a Mercedes C-Class Mirror
How to Remove the Turn Signal from a Mercedes C-Class Mirror
Mercedes Classe C (2007-2013 / W204) .. do you remove the turn signal from a Mercedes C-Class mirror? Let's see how to take out the turn signal from inside the exterior mirror. Disconnect the.. …
Replacing the Front Turn Signal Bulb on a Mercedes C-Class
Replacing the Front Turn Signal Bulb on a Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) Follow the steps to remove and replace the turn signal bulb in the front headlamp of your Mercedes C-Class. First, open the hood of your car and star…
How to Replace the Side Turn Signal Bulb on a Mercedes C-Class
How to Replace the Side Turn Signal Bulb on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) In this guide, you will learn how to remove and replace the side turn signal bulb on a Mercedes C-Class, following the instructions below. First, rem…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos