Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuse of the windshield washer pump of the Mercedes SL 5.0 V8

Model: Mercedes Sl R230 - Years 2001-2011
Part: Checks and maintenance

Following these brief and simple steps, we will see how to disassemble and replace the windshield washer pump fuse of the Mercedes SL 5.0 V8. First, open the hood and locate the external fuse box, then remove the plastic cover to access it; then use the fuse diagram and chart in the vehicle's owner's manual to replace the faulty fuse with a new one (of the same amperage), as shown in the video. At this point, all that's left is to check the windshield washer system!

Posted on 17 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Fuel Pump on Mercedes SL
Removing the Fuel Pump on Mercedes SL
Mercedes Sl (1989-2001 / MK 5, R129) Not sure how to remove the fuel pump from the Mercedes SL? Let's see how to disassemble and replace the fuel pump. Lift the car with a column lift, r…
Where are the fuses located in the Mercedes SL?
Where are the fuses located in the Mercedes SL?
Mercedes Sl (2011-2021 / MK 7, R231) Each fuse of the Mercedes SL is located inside one of the special fuse boxes that are installed on the vehicle: in this type of vehicle it is possibl…
Where Are the Fuses on a Mercedes SL?
Where Are the Fuses on a Mercedes SL?
Mercedes Sl (2011-2021 / MK 7, R231) The fuses on the Mercedes SL are located inside the designated fuse boxes present in the vehicle: this type of car has two fuse boxes. The first, the…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos