Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Fuel Pump on Mercedes SL

Model: Mercedes Sl MK 5, R129 - Years 1989-2001
Part: Fuel pump

Not sure how to remove the fuel pump from the Mercedes SL? Let's see how to disassemble and replace the fuel pump. Lift the car with a column lift, remove the cover panel of the pump (if present), and unscrew all the fastening screws around the fuel pump mounting plate. After removing the pump, disconnect the electrical connectors for the pump operation and the fuel circulation hoses. Install the new part and reverse the disassembly steps for the fuel pump. Once assembled, lower the car and test its operation.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Mercedes SL?
Where are the fuses located in the Mercedes SL?
Mercedes Sl (2011-2021 / MK 7, R231) Each fuse of the Mercedes SL is located inside one of the special fuse boxes that are installed on the vehicle: in this type of vehicle it is possibl…
Where Are the Fuses on a Mercedes SL?
Where Are the Fuses on a Mercedes SL?
Mercedes Sl (2011-2021 / MK 7, R231) The fuses on the Mercedes SL are located inside the designated fuse boxes present in the vehicle: this type of car has two fuse boxes. The first, the…
Where are the fuses located in the Mercedes SL?
Where are the fuses located in the Mercedes SL?
Mercedes Sl (2001-2011 / R230) On board the Mercedes SL it will be possible to identify the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it wil…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos