Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to activate the rear windshield wiper of the Mercedes GLK

Model: Mercedes Glk MK 1 - Years 2008-2015
Part: Checks and maintenance

Today's video will show us the instructions that will allow us to activate the rear wiper or rear windshield wiper of the Mercedes GLK. First, we get on board the car and start the instrument panel; then we move the dial with the rear windshield symbol (which we find on the left lever of the steering wheel) to activate the rear wiper, as shown in the video. It is also possible to activate the glass cleaning mode through the appropriate fluid; it is also possible to perform the same operation on the front windshield!

Posted on 16 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses Located on the Mercedes GLK?
Where Are the Fuses Located on the Mercedes GLK?
Mercedes Glk (2008-2015 / MK 1) The Mercedes GLK has dedicated fuse boxes that contain the fuses regulating the operation of the devices: in this type of vehicle, you can find two b…
Where to Find the Fuses on the Mercedes GLK
Where to Find the Fuses on the Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) On the Mercedes GLK, any fuse will be installed inside one of the dedicated fuse boxes mounted on the car: there are two of these on this type of veh…
Where Are the Fuses in a Mercedes GLK?
Where Are the Fuses in a Mercedes GLK?
Mercedes Glk (2008-2015 / MK 1) Each fuse in the Mercedes GLK is installed inside one of the dedicated fuse boxes present in the vehicle: in this type of car, you can find two. The …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos