Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Mg 3
    4. : Fuse box

MG 3 - Fuse box

Fuse Box MG 3 (2011-2024 / mk 2)

MG 3 (2011-2024 / MK 2)
How to Locate the Fuses on an MG 3
To locate the fuses on an MG 3, get inside the vehicle and find the internal fuse box located under the dashboard on the driver's side, usually near the pedals …Read all…
Posted on 13 May 2026 by ScegliAuto
MG 3 (2011-2024 / MK 2)
What is the fuse layout of the MG3?
In this video we can see where the fuse boxes of the MG3 are located and what the respective diagrams are, useful in case we need to check the fuses of a …Read all…
Posted on 14 July 2025 by ScegliAuto
MG 3 (2011-2024 / MK 2)
Where to Find the Fuse Box of the MG 3
In this mini guide dedicated to your MG 3 (model years 2019-2023), discover the steps to locate the fuse box inside the vehicle on your own. First, turn off …Read all…
Posted on 10 September 2026 by ScegliAuto
MG 3 (2011-2024 / MK 2)
Fuses Location and Diagram for the MG 3
Today, in this video tutorial, you will see the location and diagram of the fuses for the MG 3 by following these simple steps. First, locate the internal fuse …Read all…
Posted on 12 July 2026 by ScegliAuto
Battery (2) Bushings (1) Key (4) Timing belt (1) Checks and maintenance (4) Brake rotors (1) Air filter (2) Cabin air filter (5) Fuel filter (1) Light bulb (1) Headlight bulb (2) Tail light bulb (1) Exhaust muffler (1) Engine oil (1) Clock (2) Brake pads (1) Instrument cluster (1) Radiator (1) Wheel (1) Fuse box (4) Warning light – error code (1) (3) Tire pressure warning light (1) Service warning light (7) Fuel cap (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos