Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Mg 3
    4. : Brake pads

MG 3 - Brake pads

MG 3 (2011-2023 / MK 2)
Replace the front brake pads and brake discs of the MG 3
Today we will see, in this short and simple guide, how to disassemble and replace the front brake pads of the MG 3, following the instructions below. First of …read all…
Posted on 4 June 2023 by ScegliAuto
Battery (1) Bushings (1) Key (3) Timing belt (1) -board computer (1) Checks and maintenance (7) Brake discs (1) Air filter (2) Cabin air filter (4) Petrol filter (1) Headlight bulb (2) Rear light bulb (1) Muffler (1) Engine oil (1) Brake pads (1) Instrument cluster (2) Radiator (1) Wheel (1) Fuse box (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos