Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Mg 3
    4. : Cabin air filter

MG 3 - Cabin air filter

MG 3 (2011-2023 / MK 2)
How to replace the cabin filter in the MG 3?
In this tutorial, we can see how to replace the cabin filter in the MG 3, an extremely simple and fast operation. First of all, position yourself on the …read all…
Posted on 7 June 2023 by ScegliAuto
MG 3 (2011-2023 / MK 2)
MG 3 cabin air filter replacement
Today, in this guide, we will see the instructions on how to disassemble and replace the MG 3 cabin air filter, in simple and quick steps. First we board the …read all…
Posted on 27 May 2023 by ScegliAuto
MG 3 (2011-2023 / MK 2)
How to replace cabin air filter on Mg 3
If we need to replace the cabin air filter on this car let's take a look at the video and description below. Access the passenger compartment from the …read all…
Posted on 15 May 2023 by ScegliAuto
MG 3 (2011-2023 / MK 2)
How do you replace the cabin filter on the MG 3?
To be able to replace the cabin filter of the MG 3, you need to open the glove box located on the passenger side; in this way the internal fixing pins of the …read all…
Posted on 14 May 2024 by ScegliAuto
Battery (1) Bushings (1) Key (3) Timing belt (1) -board computer (1) Checks and maintenance (7) Brake discs (1) Air filter (2) Cabin air filter (4) Petrol filter (1) Headlight bulb (2) Rear light bulb (1) Muffler (1) Engine oil (1) Brake pads (1) Instrument cluster (2) Radiator (1) Wheel (1) Fuse box (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos