Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. 3
    4. : How to replace the cabin filter in the MG 3?

MG 3 - Video tutorial

Model: MG 3 MK 2 - Years 2011-2023
Part: Cabin air filter
Operation: How to replace the cabin filter in the MG 3?

In this tutorial, we can see how to replace the cabin filter in the MG 3, an extremely simple and fast operation. First of all, position yourself on the passenger seat, then open the glove compartment, press the left wall inward and, pulling it outwards, disengage it from the dashboard. Once this is done, locate the long rectangular door, open it by unlocking the clip and remove the old filter. Finally, clean the housing from any possible residue and insert the replacement, making sure to respect its direction.


Posted on 7 June 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos