Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seat of the MG 5

Model: MG 5 Ap12 - Years 2012-2018
Part: Seat

This brief guide shows you how to remove and replace the rear seats of the MG 5, following the instructions below. First, open the rear doors of your car and begin lifting the rear bench seat to detach and remove it, as shown in the video. Next, remove the backrests by unscrewing the bolts at the base. At this point, install the new rear seats, securing them properly with their bolts. Finally, reinstall the bench seat by pressing down to lock it in place!

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the spare tire located in the MG 5?
Where is the spare tire located in the MG 5?
MG 5 (2012-2018 / Ap12) The spare tire for the MG 5 is located inside the trunk of the car: to access it, open the rear hatch and lift the carpet that serves as the flooring…
How to Replace the Cabin Air Filter on the MG 5
How to Replace the Cabin Air Filter on the MG 5
MG 5 (2012-2018 / Ap12) To replace the cabin air filter on this vehicle, follow the DIY instructions below and check the video as well. Access the passenger seat; the filter…
Where is the spare tire located in the MG 5?
Where is the spare tire located in the MG 5?
MG 5 (2012-2018 / Ap12) The spare tire of the MG 5 is located under the carpet at the base of the trunk: to access it, you will need to open the rear hatch and lift the carp…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos