Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the dashboard of the MG ZS?

Model: MG ZS Zs11 - Years 2017-2024
Part: Dashboard

In order to disassemble the dashboard of the MG ZS you must first loosen the screws that secure the airbag to the steering wheel, removing the latter from its housing and unscrewing the nut that secures the steering wheel itself. When the steering wheel has been removed, it will be possible to remove the plastics placed around the steering column, then passing through those that wrap around the central panel. Then it will be possible to open the glove compartment, removing it completely and disassembling the panels placed around it; when all these pieces have been removed, it will be possible to install the new spare parts.


Posted on 6 October 2024 by ScegliAuto



How to disassemble the car stereo of the Mg Zs
MG ZS (2017-2024 / Zs11) Today we will see, in this video tutorial, how to disassemble and replace the car stereo of the Mg Zs, following the instructions below. First of all
How to remove the driver's airbag from the MG ZS.
MG ZS (2017-2024 / Zs11) In this short and simple guide, we will see the main instructions that will allow us to disassemble and replace the driver's airbag of the MG ZS. Fir
How do you replace the car radio on the MG ZS?
MG ZS (2017-2024 / Zs11) In order to replace the MG ZS car radio, you need to remove the air vent located on the right side of the dashboard, so that you can then remove all

Other guides that may interest you

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos