Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How to change the wheel with the spare wheel of the MG ZS

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Wheel
Operation: How to change the wheel with the spare wheel of the MG ZS

In this guide, we see the step-by-step instructions to remove and replace the MG ZS spare wheel with the spare, in simple and quick steps. First we open the tailgate of the boot and begin to come out all the kit necessary for the replacement of the spare wheel (ie the jack, the key and the wheel itself); then we are going to loosen the wheel bolts, then lifting the car with the jack, as shown in the video. At this point we remove and replace the wheel with the spare one, tightening the bolts crosswise, following the video to the end!


Posted on 30 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos