Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Hector
    4. : How to use the spare wheel of the MG Hector?

MG Hector - Video tutorial

Model: MG Hector MK 1 - Years 2019-2024
Part: Wheel
Operation: How to use the spare wheel of the MG Hector?

Let's see in this short and simple guide how to find and use the spare wheel of the MG Hector. First of all, we find the spare wheel under the car's floor, at the back; then we open the trunk and lift the floor, unscrewing the wheel bolt with the appropriate key (in order to lower it), as shown in the video. At this point, we proceed with the wheel replacement operation, unscrewing the bolts and fixing the new one (screwing and tightening the bolts in a crisscross pattern). Finally, we place the punctured wheel in the trunk!


Posted on 1 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos