Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the MG Hector?

Model: MG Hector MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

Video tutorial

In order to reset the tire pressure warning light on the MG Hector, you need to inflate the tires until they reach the recommended pressure value: this value will be indicated on the sticker attached to the driver's side door pillar. Once the tires have been inflated, you can go inside the vehicle and turn on the instrument panel: the warning light should disappear automatically.

If it is still present, you will need to drive for a few kilometers to allow the sensors to read the new pressure values and make the signal disappear from the panel.


Posted on 7 December 2024 by ScegliAuto


Related tutorials

How does the tire pressure and temperature display system work on the MG Hector?
How does the tire pressure and temperature display system work on the MG Hector?
MG Hector (2019-2026 / MK 1) Let's see how the tire pressure monitoring system works on the MG Hector: to access the system, we need to touch the dedicated icon on the infotainme…
How to Reset the Trip Meter on the MG Hector
How to Reset the Trip Meter on the MG Hector
MG Hector (2019-2026 / MK 1) Today's video will show you how to reset the trip meter or partial mileage on the MG Hector, following the instructions below. First, get inside the …
How to Replace the Remote Battery in the MG Hector?
How to Replace the Remote Battery in the MG Hector?
MG Hector (2019-2026 / MK 1) To replace the battery in the MG Hector remote, first remove the emergency key from the top of the remote. This will allow you to pry open the back c…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos