Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the License Plate Bulb on an MG ZS

Model: MG ZS Zs11 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: License plate light

See other generations:
Video tutorial

To change the license plate bulb on an MG ZS (and replace it with an LED), the official manual advises disconnecting the negative terminal of the battery and removing the rear bumper cover, but the video shows a simpler method. Using a flathead screwdriver, insert it into the left side of the license plate light cover and pry downwards: the plastic will release.

Pull out the bulb holder by turning it a quarter turn counterclockwise. Remove the original halogen bulb and replace it with the LED (which has four LEDs on each side and on the head), ensuring it is the same type and specification as the original.

Insert the new bulb into the holder, aligning the two tabs, then reinsert it into the socket and turn a quarter turn clockwise until it clicks. The difference between the yellow halogen light and the white LED is evident.

Repeat the same process for the other bulb.


Posted on 1 October 2026 by ScegliAuto


Related tutorials

MG ZS (2017-2024 / Zs11) The license plate bulb may burn out, making it necessary to replace it with a new one. How can you do this if you don't want to or can't go to a shop…
MG ZS (2017-2024 / Zs11) Follow these main instructions to remove and replace the headlight bulb on the MG ZS. First, open the hood of the vehicle and start by removing the p…
MG ZS (2017-2024 / Zs11) Here are the instructions for replacing the headlight bulb on an MG ZS. First, open the hood of the vehicle and remove the plastic protective cover o…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Tyre Pressure Monitoring System (TPMS) Light on the Toyota Yaris

These brief and simple steps will show you how to reset the tyre pressure monitoring system (TPMS) light on the Toyota Yaris. Before resetting the light, ensure that all four tyres are at the correct operating pressure. Get inside the vehicle on the driver's side and locate the TPMS reset button found at the bottom left of the dashboard (next to the steering wheel); press and hold it until the TPMS light on the instrument cluster resets, following the video until the end!

Watch the video!


by ScegliAuto

More videos