Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the License Plate Bulb in the MG ZS

Model: MG ZS Zs11 - Years 2017-2024
Part: License plate light

The license plate bulb may burn out, making it necessary to replace it with a new one. How can you do this if you don't want to or can't go to a shop? It's simple: you can do it yourself because all you need is a screwdriver and, of course, a replacement bulb. First, remove the screw that secures the bulb holder, take it off, and pull out the burnt bulb. Replace it with a new, working one, either halogen or LED if you prefer. After inserting it, reposition the holder in its place and reattach the screw.

Posted on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

MG ZS (2017-2024 / Zs11) To replace the headlight bulb of the MG ZS, open the hood to access the inside of the headlight corresponding to the bulb to be replaced. There will …
MG ZS (2017-2024 / Zs11) This guide provides step-by-step instructions to remove and replace the tire with the spare on the MG ZS in simple and quick steps. First, open the r…
MG ZS (2017-2024 / Zs11) Do you want to replace the remote key battery on this type of vehicle? First, purchase a new battery, then take a screwdriver to pry open the joint b…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos