Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on an MG ZS

Model: MG ZS Zs11 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight bulb

See other generations:
Video tutorial

Here are the instructions for replacing the headlight bulb on an MG ZS. First, open the hood of the vehicle and remove the plastic protective cover of the bulb. Then, take out the bulb holder along with the light, replacing the low beam bulb with a new one (of the correct type and with the same base), as shown in the video.

Install the light back into the housing, connect it, and check its operation; similarly, replace the other headlight bulb!


Posted on 16 September 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb of the MG ZS
How to Replace the Headlight Bulb of the MG ZS
MG ZS (2017-2024 / Zs11) To replace the headlight bulb of the MG ZS, open the hood to access the inside of the headlight corresponding to the bulb to be replaced. There will …
How to Replace the Headlight Bulb on the MG ZS
How to Replace the Headlight Bulb on the MG ZS
MG ZS (2017-2024 / Zs11) Follow these main instructions to remove and replace the headlight bulb on the MG ZS. First, open the hood of the vehicle and start by removing the p…
How to Replace the Headlight Bulb on the MG ZS
How to Replace the Headlight Bulb on the MG ZS
MG ZS (2017-2024 / Zs11) In this video tutorial, see the main instructions on how to remove and replace the headlight bulb on the MG ZS. First, open the hood and start unscre…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos