Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Handbrake Caliper on the MG ZS?

Model: MG ZS Zs11 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Parking brake

See other generations:
Video tutorial

To replace the handbrake caliper on the MG ZS, you need to lift the car so that you can loosen the bolts securing the right rear wheel to the hub. Once these are removed, you can completely take off the wheel and access its components at the back: the handbrake caliper will be directly connected to the rear brake caliper and will need to be removed by loosening its bolts.

After the old caliper is removed, you can install the new one, reassembling all the components that were taken off earlier.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wheel Bearing on the MG ZS
How to Replace the Rear Wheel Bearing on the MG ZS
MG ZS (2017-2024 / Zs11) In this brief and simple guide, see how to remove and replace the rear wheel bearing on the MG ZS by following the instructions below. First, lift th…
How to Use the Cruise Control on the MG ZS
How to Use the Cruise Control on the MG ZS
MG ZS (2017-2024 / Zs11) Today's guide shows you how to properly use the cruise control on the MG ZS, following the instructions below. First, get in the vehicle and start dr…
How to reset the service light on a MG ZS
How to reset the service light on a MG ZS
MG ZS (2017-2024 / Zs11) In this video, we will see how to reset the service light of the MG ZS: we turn on the car without starting the engine and without pressing the brake…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos