|
Do it yourself
| |||
| ||||
|
Video tutorial
Follow this simple guide to remove and replace the wheel on the MG 3, following the instructions below. First, remove the wheel bolt covers using the provided wrench; then use a socket wrench to loosen all the wheel bolts, as shown in the video. Next, lift the vehicle with the jack and remove the front wheel, replacing it with the spare; finally, secure it properly by hand-tightening the bolts and tightening them in a crisscross pattern!
Updated on 7 July 2026 by ScegliAuto
Related tutorials
MG 3
(2011-2024 /
MK 2)
Today, in this video tutorial, learn how to remove and replace the front brake pads on the MG 3. First, lift the vehicle and start removing the wheel…
MG 3
(2011-2024 /
MK 2)
Today, we will see in this short and simple guide how to remove and replace the front brake pads on the MG 3, following the instructions below. First…
MG 3
(2011-2024 /
MK 2)
To replace the rear headlight bulb on the MG 3, open the trunk of the car to access the two screws next to it. Once the screws next to the gasket are…
Other guides you may be interested in
|
How to Open the Fuel Filler Flap in the Hyundai i30?
In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |