Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. 3
    4. : How to replace the rear light bulb on the MG 3?

MG 3 - Video tutorial

Model: MG 3 MK 2 - Years 2011-2023
Part: Rear light bulb
Operation: How to replace the rear light bulb on the MG 3?

In order to replace the rear light bulb of the MG 3 you have to go to open the tailgate of the car, so that you go to loosen the two screws next to it. When the aforementioned screws next to the gasket have been removed, it will be possible to slide the headlight out of its housing, so that the rear connector is disconnected. By completely removing the headlight it will be possible to extract the bulb inside and replace it with a new one. After this has been installed, it will be necessary to connect the headlight connector, fixing it inside its housing.


Posted on 27 April 2024 by ScegliAuto



How to replace the headlight bulbs in the MG 3?
MG 3 (2011-2023 / MK 2) As we can see in this tutorial, replacing the headlight bulbs in the MG 3 is an extremely quick and easy operation. First of all, make sure that the
How to replace the MG 3 headlight bulb
MG 3 (2011-2023 / MK 2) If you want to replace the headlight bulb of your MG 3 (year 2011-2022), simply put into practice the instructions that you will find described below
Reset TPMS on a MG 3
MG 3 (2011-2023 / MK 2) In today's tutorial, we can see how to reset the TPMS light, which is the tire pressure warning light, on an MG 3, second-generation restyling model

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos