Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. 3
    4. : How to replace the MG 3 headlight bulb

MG 3 - Video tutorial

Model: MG 3 MK 2 - Years 2011-2023
Part: Headlight bulb
Operation: How to replace the MG 3 headlight bulb

If you want to replace the headlight bulb of your MG 3 (year 2011-2022), simply put into practice the instructions that you will find described below. First, make sure your MG 3 is turned off and parked on a level surface with the handbrake activated. Immediately afterwards, unlock the front hood using the button and lift it completely. At this point, locate and remove the protective cap located in the internal area of the engine compartment and proceed with the removal of the faulty bulb. Finally, fit the new one and the procedure is over.


Posted on 5 October 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos