Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Control Arm Bushing on the MG 3

Model: MG 3 MK 2 - Years 2011-2024
Part: Bushings

In this video tutorial, you will find instructions to remove and replace the front control arm bushing on the MG 3. First, lift the vehicle and start unscrewing the screws securing the plastic cover located under the engine; then, remove the control arm pin using a socket wrench and a ratchet, as shown in the video. At this point, extract the old bushing from the control arm using a puller; then install the new bushings and reassemble everything by following the reverse procedure!

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on the MG 3
How to Replace the Headlight Bulb on the MG 3
MG 3 (2011-2024 / MK 2) To replace the headlight bulb on your MG 3 (2011-2022), simply follow the instructions below. First, ensure your MG 3 is turned off and parked on a f…
Replacing the Front Brake Pads and Rotors on the MG 3
Replacing the Front Brake Pads and Rotors on the MG 3
MG 3 (2011-2024 / MK 2) Today, we will see in this short and simple guide how to remove and replace the front brake pads on the MG 3, following the instructions below. First…
How to Replace the Rear Headlight Bulb on the MG 3?
How to Replace the Rear Headlight Bulb on the MG 3?
MG 3 (2011-2024 / MK 2) To replace the rear headlight bulb on the MG 3, open the trunk of the car to access the two screws next to it. Once the screws next to the gasket are…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos