Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How to remove the driver's airbag from the MG ZS.

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Airbags
Operation: How to remove the driver's airbag from the MG ZS.

In this short and simple guide, we will see the main instructions that will allow us to disassemble and replace the driver's airbag of the MG ZS. First of all, we get on board the car and use a flat screwdriver to release our airbag from the back, pushing inside the holes; then we disconnect the electrical connector to permanently remove the airbag from the steering wheel, as shown in the video. At this point, if necessary, we proceed to disassemble the steering wheel; we then reassemble our driver's airbag, applying the reverse procedure of disassembly!


Posted on 6 April 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos