Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How to replace the cabin filter in the MG ZS?

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Cabin air filter
Operation: How to replace the cabin filter in the MG ZS?

Replacing the cabin filter in the MG ZS, as we can see in this tutorial, is an extremely simple and fast operation. First of all, we position ourselves on the passenger seat, then we open the glove compartment and remove it from the dashboard by removing the plastic blocks placed on both walls. Once this is done, we locate the long rectangular door, open it by unlocking the clips and remove the old filter from the housing. We insert the replacement, being careful to respect its direction, and follow the reverse procedure to reassemble everything.


Posted on 3 April 2023 by ScegliAuto



How to replace the cabin filter in the MG ZS EV?
MG ZS (2017-2024 / Zs11) In this tutorial we can see how to replace the cabin air filter in the MG ZS EV, a very simple and fast operation. First of all, since the filter is
How to replace the internal air filter in the MG ZS
MG ZS (2017-2024 / Zs11) In today's video we will see how to replace the cabin air filter in the MG ZS. As a first step, let's get into the car and sit in the passenger side
How do you replace the fuel filter of the MG ZS?
MG ZS (2017-2024 / Zs11) To replace the fuel filter of the MG ZS, it is necessary to lift the car so that the components in the lower part of the engine compartment can be ac

Other guides that may interest you

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos