Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Mg Zs
    4. : Cabin air filter

MG ZS - Cabin air filter

MG ZS (2017-2024 / Zs11)
How to replace the cabin filter in the MG ZS?
Replacing the cabin filter in the MG ZS, as we can see in this tutorial, is an extremely simple and fast operation. First of all, we position ourselves on the …read all…
Posted on 3 April 2023 by ScegliAuto
MG ZS (2017-2024 / Zs11)
How to replace the cabin filter in the MG ZS EV?
In this tutorial we can see how to replace the cabin air filter in the MG ZS EV, a very simple and fast operation. First of all, since the filter is located …read all…
Posted on 14 November 2022 by ScegliAuto
Airbags (1) Car stereo (4) Battery (6) Spark plugs (2) Bodywork (1) Key (9) -board computer (1) Checks and maintenance (8) Dashboard (1) Bearing (1) Air filter (3) Cabin air filter (2) Diesel filter (1) Hand brake (1) Accessory Kit (2) Headlight bulb (2) Rear light bulb (2) Engine (1) Engine oil (2) Door panel (3) Instrument cluster (2) Radiator (1) Wheel (1) Fuse box (4) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos