Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Mg Zs
    4. : Battery

MG ZS - Battery

MG ZS (2017-2024 / Zs11)
How to replace the battery of the MG ZS key remote control
These short and simple steps will show us how to disassemble and replace the battery of the key remote for the MG ZS. First, we take our remote and start …read all…
Posted on 15 April 2024 by ScegliAuto
MG ZS (2017-2024 / Zs11)
How to replace the Mg 5 Zs battery.
If we want to replace the battery on this car model, in the description we have provided below we will find the details and operations to perform a safe …read all…
Posted on 15 May 2023 by ScegliAuto
MG ZS (2017-2024 / Zs11)
How to replace the battery on the Mg Zs
If we want to replace the battery on this car model because it has run out, in the description and video we find below, we can identify the procedures and …read all…
Posted on 9 May 2023 by ScegliAuto
MG ZS (2017-2024 / Zs11)
How to replace the remote control battery of the Mg Zs key
Let's see in this guide how to disassemble and replace the remote control battery of the Mg Zs key, in simple and quick steps. First, we take our remote …read all…
Posted on 9 April 2023 by ScegliAuto
MG ZS (2017-2024 / Zs11)
How to replace the MG ZS key fob battery
In this guide, let's briefly see the instructions that will allow us to disassemble and replace the remote control battery of the MG ZS key. First of all, we …read all…
Posted on 27 November 2022 by ScegliAuto
MG ZS (2017-2024 / Zs11)
How do i replace the MG ZS battery?
In order to replace the MG ZS battery, you need to open the hood so that you can locate the device inside the engine compartment. The battery will be located …read all…
Posted on 11 May 2024 by ScegliAuto
Airbags (1) Car stereo (4) Battery (6) Spark plugs (2) Bodywork (1) Key (9) -board computer (1) Checks and maintenance (8) Dashboard (1) Bearing (1) Air filter (3) Cabin air filter (2) Diesel filter (1) Hand brake (1) Accessory Kit (2) Headlight bulb (2) Rear light bulb (2) Engine (1) Engine oil (2) Door panel (3) Instrument cluster (2) Radiator (1) Wheel (1) Fuse box (4) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos