Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Mg Zs
    4. : Air filter

MG ZS - Air filter

Air Filter MG ZS (2017-2024 / zs 11)

MG ZS (2017-2024 / Zs11)
How to Change the Air Filter on the MG ZR
Do you want to replace the air filter yourself on this car model? In the description below, you will find all the information and instructions needed to …Read all…
Posted on 1 August 2026 by ScegliAuto
MG ZS (2017-2024 / Zs11)
How to Replace the Cabin Air Filter in the MG ZS
In today's video, you will see how to replace the cabin air filter in the MG ZS. As the first step, enter the car and take a seat in the passenger side. Now, …Read all…
Posted on 6 September 2026 by ScegliAuto
MG ZS (2017-2024 / Zs11)
How to Replace the Air Filter in the MG ZS
If the air filter in the engine compartment of your MG ZS shows significant signs of wear, it's time to replace it with a new one to maintain the reliability …Read all…
Posted on 18 July 2026 by ScegliAuto
Airbag (1) Air conditioning (1) Car stereo (5) Battery (3) Spark plugs (2) Body (1) Key (15) Onboard computer (7) Checks and maintenance (13) Dashboard (1) Bearing (1) Headlight (1) Air filter (3) Cabin air filter (3) Diesel fuel filter (1) Parking brake (1) Accessory kit (2) Headlight bulb (4) Tail light bulb (2) License plate light (1) Engine (1) Engine oil (3) Clock (7) Door trim panel (3) Instrument cluster (1) Radiator (1) Wheel (1) Fuse box (18) Rearview mirror (1) (18) Service warning light (17) Fuel cap (4) Windshield wipers (4) Thermostat (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos