Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How to replace the MG ZS air filter

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Air filter
Operation: How to replace the MG ZS air filter

If the air filter inside the engine compartment of your MG ZS shows serious signs of wear, then it is time to replace it and fit a new one so as to preserve the reliability and performance of the engine itself. Let's find out how. First, turn off the car and park it safely. Raise the front hood fully and locate the box containing the air filter. Unscrew the screws that hold the cover in place and immediately remove it. Finally, replace the filter and at the end replace the cover without forgetting to re-tighten all the screws removed previously.


Posted on 16 May 2024 by ScegliAuto



How to replace the internal air filter in the MG ZS
MG ZS (2017-2024 / Zs11) In today's video we will see how to replace the cabin air filter in the MG ZS. As a first step, let's get into the car and sit in the passenger side
How to change gears on the Mg Zr.
MG ZS (2017-2024 / Zs11) Do we want to proceed with replacing the air filter on this car model independently? In the description below, we can find all the information and us
How to replace the cabin filter in the MG ZS EV?
MG ZS (2017-2024 / Zs11) In this tutorial we can see how to replace the cabin air filter in the MG ZS EV, a very simple and fast operation. First of all, since the filter is

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos