Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. Mg Zs
    4. : Fuse box

MG ZS - Fuse box

MG ZS (2017-2024 / Zs11)
What is the fuse diagram for the MG ZS?
In this video we can see where the fuse boxes of the MG ZS are located and what their respective diagrams are, to consult in case we need to check the fuses of …read all…
Posted on 15 April 2024 by ScegliAuto
MG ZS (2017-2024 / Zs11)
Where is the fuse box located in the MG ZS?
In this new mini guide, we will describe all the necessary steps to independently locate the fuse box inside your MG ZS. First of all, you need to enter the …read all…
Posted on 27 June 2023 by ScegliAuto
MG ZS (2017-2024 / Zs11)
Where is the main fuse box located in the 2020 MG ZS?
In this new mini guide dedicated to your 2020 MG Zs, we will discover where the main fuse box is located. Before proceeding, we remind you that the car must …read all…
Posted on 5 June 2023 by ScegliAuto
MG ZS (2017-2024 / Zs11)
What is the fuse diagram on the MG ZS?
In this video we can see the position of the fuse boxes, and the respective diagrams, in the MG ZS, useful in case a device is malfunctioning and we want to …read all…
Posted on 19 November 2022 by ScegliAuto
Airbags (1) Car stereo (4) Battery (6) Spark plugs (2) Bodywork (1) Key (9) -board computer (1) Checks and maintenance (8) Dashboard (1) Bearing (1) Air filter (3) Cabin air filter (2) Diesel filter (1) Hand brake (1) Accessory Kit (2) Headlight bulb (2) Rear light bulb (2) Engine (1) Engine oil (2) Door panel (3) Instrument cluster (2) Radiator (1) Wheel (1) Fuse box (4) Interior rearview mirror (1) Windscreen wipers (2) Thermostat (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos