Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the MG ZS located?

Model: MG ZS Zs11 - Years 2017-2024
Part: Fuse box

If you want to find the fuse box of your first-generation MG ZS by yourself in a few seconds, just follow the steps in this new guide. First, you need to access the engine compartment, so fully lift the front hood of the car and properly position the safety support. Once these two simple operations are completed, locate the fuse box situated on the right side of the engine compartment and remove the cover of the box to finally have free access to the fuses of your MG ZS. To work on them, first disconnect the battery.

Posted on 10 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Main Fuse Box of the 2020 MG ZS
Where to Find the Main Fuse Box of the 2020 MG ZS
MG ZS (2017-2024 / Zs11) In this new mini guide dedicated to your 2020 MG ZS, discover where the main fuse box is located. Before proceeding, remember that the vehicle must r…
Where is the fuse box located in the MG ZS EV 2023?
Where is the fuse box located in the MG ZS EV 2023?
MG ZS (2017-2024 / Zs11) If you own a MG ZS EV (year 2023) and are curious to find out where the fuse box is located, then you are in the right place. Below, in fact, we will…
Where to Find the Fuse Box of the MG ZS
Where to Find the Fuse Box of the MG ZS
MG ZS (2017-2024 / Zs11) In this mini guide, you will learn all the steps necessary to independently locate the fuse box inside your MG ZS. First, enter the vehicle and ensur…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos