Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How do i replace the MG ZS battery?

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Battery
Operation: How do i replace the MG ZS battery?

In order to replace the MG ZS battery, you need to open the hood so that you can locate the device inside the engine compartment. The battery will be located on the right side of the compartment, immediately next to the engine block and under the air filter. In order to remove it from its seat, it will be possible to disconnect the terminals and unscrew its fixing screws. When the device has been released, the battery can be removed so that it can be replaced with a new spare part. After replacement, it will need to be connected to the cables and fastened with bolts.


Posted on 11 May 2024 by ScegliAuto



How to change key battery on Mg Zs
MG ZS (2017-2024 / Zs11) Do we want to proceed with replacing the remote control key battery on this type of car? First you need to buy a new battery, then take a screwdriver
How to change the key battery on the Mg Zs.
MG ZS (2017-2024 / Zs11) If we have noticed that the remote control key's battery has run out and we want to proceed with replacing it ourselves, in the description below we
How to replace the battery of the key of the Mg Zs
MG ZS (2017-2024 / Zs11) If we need to replace the remote control key battery on this car, we will find the necessary information and methods in this video and in this descri

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos