Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to change the key battery on the Mg Zs.

Model: MG ZS Zs11 - Years 2017-2024
Part: Key

If we have noticed that the remote control key's battery has run out and we want to proceed with replacing it ourselves, in the description below we can find all the useful indications and the procedure to follow for a correct replacement. First of all, get the new CR 2032 battery model. Then proceed to remove the back cover of the remote control, in this way we can access the compartment that contains the battery. Use a pointed object to remove the old battery and then replace it with the new one, being careful to maintain the polarity direction. Finally, proceed to close the cover.


Posted on 18 November 2024 by ScegliAuto



How to change key battery on Mg Zs
MG ZS (2017-2024 / Zs11) Do we want to proceed with replacing the remote control key battery on this type of car? First you need to buy a new battery, then take a screwdriver
How to open the MG ZS if the battery is dead (and other utilities)
MG ZS (2017-2024 / Zs11) Let's see how to board an MG ZS if the remote control runs out of battery: on the remote control there is a small button that, when pressed, releases
How to replace the MG ZS key battery
MG ZS (2017-2024 / Zs11) Fortunately, replacing the battery in the key of your MG ZS is one of the simplest operations to carry out independently and in a few seconds. Below

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos