Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the MG ZS remote control?

Model: MG ZS Zs11 - Years 2017-2024
Part: Key

In this tutorial, we can see how to replace the battery of the MG ZS remote control, an extremely simple and quick operation. To do this, we will only need a small screwdriver with a flat tip and a replacement battery of type CR2032. First, unlock the metal side element by pulling it outwards, then extract the emergency key, lever in the newly freed slot, and separate the two halves of the remote control. Next, remove the old battery, insert the replacement battery respecting the polarity, and reassemble everything following the reverse procedure.

Posted on 24 November 2024 by ScegliAuto

Video tutorial

Related tutorials

MG ZS (2017-2024 / Zs11) Let's see how to board an MG ZS if the remote control runs out of battery: on the remote control there is a small button that, when pressed, releases…
MG ZS (2017-2024 / Zs11) These short and simple steps will show us how to disassemble and replace the battery of the key remote for the MG ZS. First, we take our remote and s…
MG ZS (2017-2024 / Zs11) In this short video we will see how to replace the battery of the key remote of the MG ZS. First, take your remote and start removing the plastic bac…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos