Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the MG ZS key remote control

Model: MG ZS Zs11 - Years 2017-2024
Part: Key

In this short video we will see how to replace the battery of the key remote of the MG ZS. First, take your remote and start removing the plastic back cover by levering on the sides; then remove the battery found inside, as shown in the video. At this point, install the new remote battery, of the correct type (in this case a CR 2032 3V); insert it in the correct direction and finally secure the plastic back cover, then check the functioning of all commands.

Posted on 15 November 2024 by ScegliAuto

Video tutorial

Related tutorials

MG ZS (2017-2024 / Zs11) These short and simple steps will show us how to disassemble and replace the battery of the key remote for the MG ZS. First, we take our remote and s…
MG ZS (2017-2024 / Zs11) This guide briefly outlines the steps to disassemble and replace the battery in the key fob for the MG ZS. First, take your key fob and remove the ph…
MG ZS (2017-2024 / Zs11) In this guide, we will see how to disassemble and replace the battery in the key fob of an MG ZS in simple and quick steps. First, take your key fob …

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos