Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. MG
  4. :
  5. ZS
  6. : How to replace the battery of the MG ZS key remote control

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Battery
Operation: How to replace the battery of the MG ZS key remote control

These short and simple steps will show us how to disassemble and replace the battery of the key remote for the MG ZS. First, we take our remote and start gently detaching the key from it; then we pry open the sides to split the case in two parts, accessing the electronic board and the battery, as shown in the video. At this point, we remove the battery and replace it with a new one of the correct type and with the same code; we insert it in the correct direction and reassemble the remote, checking the functioning of all commands!


Posted on 15 April 2024 by ScegliAuto

How to replace the Ford Transit key battery

Below I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key.

Watch the video!


by ScegliAuto

More videos