Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. MG
    3. :
  3. ZS
    4. : How to replace the MG ZS key fob battery

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Battery
Operation: How to replace the MG ZS key fob battery

In this guide, let's briefly see the instructions that will allow us to disassemble and replace the remote control battery of the MG ZS key. First of all, we take our remote control in hand and start removing the physical key from the remote control body; after which we lever on the side of the same to open it, thus accessing the electronic board and the battery, as illustrated in the video. Now we remove and replace the battery with the new one, of the right type (in this case a 3V CR 2032); then reassemble the remote control, following the video tutorial until the end!


Posted on 27 November 2022 by ScegliAuto



How to change key battery on Mg Zs
MG ZS (2017-2024 / Zs11) Do we want to proceed with replacing the remote control key battery on this type of car? First you need to buy a new battery, then take a screwdriver
How to replace the MG ZS key battery
MG ZS (2017-2024 / Zs11) Fortunately, replacing the battery in the key of your MG ZS is one of the simplest operations to carry out independently and in a few seconds. Below
How to replace the battery of the MG ZS key remote control
MG ZS (2017-2024 / Zs11) These short and simple steps will show us how to disassemble and replace the battery of the key remote for the MG ZS. First, we take our remote and s

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos