Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. MG
  4. :
  5. ZS
  6. : How do you replace the car radio on the MG ZS?

MG ZS - Video tutorial

Model: MG ZS Zs11 - Years 2017-2024
Part: Car stereo
Operation: How do you replace the car radio on the MG ZS?

In order to replace the MG ZS car radio, you need to remove the air vent located on the right side of the dashboard, so that you can then remove all the molding that is located along the dashboard and around the car radio. Once this has been detached, it will be possible to access the screws underneath, which fix the radio inside its seat. By unscrewing it, the device can be extracted so that the connectors in its rear part can be disconnected. Now it will be necessary to connect the new device to them, fixing it with the relative screws and installing the moulding.


Posted on 10 May 2023 by ScegliAuto



How to replace the factory radio of the MG ZS.
MG ZS (2017-2024 / Zs11) Let's see in this guide how to remove and replace the standard car radio with an Android type radio for the MG ZS, in simple and quick steps. First,
Replacement of the stock car radio with an Android one on the MG ZS
MG ZS (2017-2024 / Zs11) Let's briefly discover the steps that will allow us to disassemble and replace the stock car stereo with a new multimedia system of the Android type
How to disassemble the car stereo of the Mg Zs
MG ZS (2017-2024 / Zs11) Today we will see, in this video tutorial, how to disassemble and replace the car stereo of the Mg Zs, following the instructions below. First of all

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos