Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the MG 3?

Model: MG 3 MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter on the MG 3, open the glove compartment located on the passenger side. This allows you to detach the internal fastening pins of the compartment so it can be fully lowered, giving access to the components at the back.

Here you will find the filter box covered by the designated cover: by removing this cover, you can pull the cabin filter out of its housing, allowing you to insert the new replacement part and reassemble all previously removed components.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Air Filter on the MG 3
How to Replace the Cabin Air Filter on the MG 3
MG 3 (2011-2024 / MK 2) If you need to replace the cabin air filter on this vehicle, take a look at the video and the description below. Access the cabin from the passenger …
How to Replace the Cabin Filter in the MG 3
How to Replace the Cabin Filter in the MG 3
MG 3 (2011-2024 / MK 2) In this tutorial, you will see how to replace the cabin filter in the MG 3, a very simple and quick operation. First, sit in the passenger seat, then…
How to replace the cabin air filter of the MG3 2022
How to replace the cabin air filter of the MG3 2022
MG 3 (2011-2024 / MK 2) If you often use the air conditioning in your MG 3 (year 2022), you must proceed with the periodic replacement of the cabin air filter in order to no…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos